BD06
Bd0 Series
Standard Profile DIP
Image shown represents the product series and may not indicate the actual part number
Toolbox
Downloads
With an extended actuator for easy actuation and an open bottom construction that allows for solder washing without the need for a tape seal, BD series standard profile DIP switches from C&K are used by designers for function controlling, logic switching in computers and peripherals and industrial control address switches.
Features and Benefits
- Traditional full profile DIP switch
- Extended actuator for easy actuation
- Open bottom construction allows for solder washing without the need for tape seal
Typical Applications
- Address switch for industrial controls
- Logic switching for computers and peripherals
- Function controlling for numerous applications
Specifications
-
Contact Rating:
Carry: 100 mA max. @ 50 V DC.; Switch: 100 mA max. @ 5 V DC or 25 mA max. @ 25 V DC
-
Electrical Life:
10,000 make-and-break cycles at full load, each circuit
-
Contact Resistance:
Below 50 milliohms typ. Initial @ 2-4 V DC 100mA
-
Insulation Resistance:
10⁹ ohms min.
-
Dielectric Strength:
500 V RMS min. @ sea level between adjacent terminals
-
Operating Temperature:
-40°C to 85°C
-
Solderability:
Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging)
BD06
-
Most Common:
No
-
Current Rating:
100mA
-
Circuit:
SPST
-
Mounting Type:
Thru-hole
-
Sealing:
Unsealed
-
Illumination:
No/None
-
Number of Positions:
6
-
Electrical Life Cycles:
10,000
-
Pitch:
0.100" (2.54mm), Full
-
Termination Style:
Thru-hole
-
Height Above Board:
0.297" (7.54mm)
-
Actuator Type:
Slide (Standard)
-
Actuator Level:
Raised
-
Washable:
Yes
- Process Features:
-
Contact Material:
Phosphor Bronze
-
Contact Finish:
Gold
-
Voltage Rating:
5VDC
-
Packaging:
Tube